MD
ask Dresdner
homeproductsfinishing tipssonsultingpurchase books and videos
 

company store
bio
links
services
photo gallery
faq
support
email
checkthisout


bookcase

How about a Purdy brush?

woodfinder
wwj

Finishing Tips ...
 
 

Hit the Deck:

"...our thoughts turn first to going out onto the deck or porch to enjoy the sun, and second to how ratty it has gotten since last year"

 


It is that time of the year when our thoughts turn first to going out onto the deck or porch to enjoy the sun, and second to how ratty it has gotten since last year. Time to clean the deck, restore its color, kill the mildew, and recoat, not necessarily in that order. Here are a few guidelines that should help.

To kill mildew and algae: The traditional way is to mix one part common household laundry bleach with two parts water and wash down the deck. I use a swab mop on the flats and a pump type portable garden sprayer for the rails and posts. When it is dry, hose off the deck with plenty of water. Unfortunately, this will kill off any vegetation underneath. If you need a safer alternative, try Zinsser's Jomax concentrated cleaner and mildew killer. It works great and won't destroy plants. One gallon makes 20 gallons of solution, and oddly enough, is cheaper than bleach!

To restore gray wood to its original color: Mix oxalic acid (often sold as deck brightener) to about a 5% solution in water and flood it liberally onto the gray, raw wood. It will kill the gray and bring back the original color. Once again, wash off liberally with the hose when it is dry.

For just plain dirt: A good scrub with TSP or TSP substitute in water will help dislodge the dirt. Use a stiff bristle scrub brush to get things moving. As before, wash off afterwards with the hose.

When it is time to recoat: Let the deck dry and pick out the sealer you want. They fall into three categories. The weakest clear coating is waterproofing, which will offer rain shedding but very little protection and must be recoated often. Next come the clear sealers, that offer more protection, including UV block, and will last up to two years before recoating is needed. Finally, there are the pigmented opaque and semi-transparent sealer/stains. These offer the most protection, but block the true color of the wood. This year, I am putting Zinsser's F&P clear deck coating on my deck and applying it with a wide format floor finish application pad. It is quick, easy, and adds just the right amount of finish in one 18" wide swath.

Back to Archives

Information

© 1999 - 2008 by Michael Dresdner. All rights reserved. No parts of these publications may be reproduced in any form or by any means without the written permission of the author.

 
 


news
Check out Michael at Woodanswers.com.
woodanswers


Michael Dresdner
3303 28th St., SE
Puyallup, WA 98374
Telephone 253-770-1664
Email Us

Sandor's Workshop
realpaint

      home · products · archives · consulting · books & videos  
    © 1999 - 2008 Michael Dresdner                                  Webmaster willcee